Obut MATCH 0-grade striated

Specific qualities

• This Obut Match 0-grade striated boule set offers a good hand grip for effective pointing on soft ground.
• Good resistance to impact marking.

Technical features

• Steel : carbon steel requires regular oiling to avoid oxidation.
• Finish : black satin, which will gradually wear off with use.
• Hardness : half-soft, over 120 kg/mm².
• Balance : compliant with FIPJP requirements
• Range :
  • Ø 71 to 76 mm.
  • Weight 650 to 730 g.

• Touch : slightly rough for an excellent hand grip.
• Wear : medium wear rate.
• Carbon steel: requires regular oiling to avoid oxidation.
• Petanque boules made in St-Bonnet-le-Château, France.
• Petanque boules approved for competition use by the FIPJP.

• A set of 3 OBUT MATCH 0-grade striated petanque boules approved for competition use by the FIPJP.
• One jack engraved with OBUT.
• One temporary storage bag screen-printed with OBUT, leaving you free to choose your pouch at a later date.
• Supplied in a cardboard box. Dimensions 84 x 89 x 248 mm.

Finish

• When first purchased, the Obut MATCH 0-grade striated petanque boule has a satin coating.
• As you use it, with repeated contact with the ground, this coating will get scratched, then start to wear off or disappear completely to leave you with the bare steel.

Care of your boules

• The Obut MATCH 0-grade striated carbon steel competition boule requires a little care and attention after each game and at least once a month if it is not used.
• We recommend using the Obut boule care product.

A tip from Obut

Don't leave your MATCH 0-grade striated boules in your car boot, as they may be exposed to sudden changes in temperature, leading to condensation.
Don't keep boules in pouches with a foam compartment. Foam stays permanently slightly damp and that will accentuate the oxidation of the boules.
Such significantly damp conditions will be harmful to your boules in the long run, as they can cause oxidation.
Remember to take your boules out of the boot of your car or their pouch if it has a foam compartment and store them in a dry place.

What elements should you keep for the warranty ?

• The warranty card located on the flap of the box.
• The exterior facing label.