Obut boules SOLEIL 0-grade striated

Specific qualities

• The only petanque boule that combines the advantages of low hardness with the quality of stainless steel.
• Low bounce.
• Lands well when shooting to the front.
• Stops quickly when pointing.

Technical characteristics

• Steel :  stainless steel.
• Treatment : controlled process.
• Finish :  natural stainless steel satin.
• Hardness :  Soft, over 110 kg/mm².
• Balance compliant with FIPJP requirements.
• Range :
• Ø 71 to 76 mm.
• Weight 650 to 730 g.

• Feel :  soft-touch stainless steel for a good release from the hand.
• Wear : pronounced wear.
• Stainless steel : requires only a minimum of occasional care.
• Petanque boules made in St-Bonnet-le-Château, Loire, France.
• Boules approved for competition use by the FIPJP

• A set of 3 OBUT SOLEIL 0-grade striated petanque boules approved for competition use by the FIPJP.
• One jack engraved with Obut.
• One temporary storage bag screen-printed with OBUT, leaving you free to choose your pouch at a later date.
• Supplied in a cardboard box. Dimensions 84 x 89 x 248 mm.

Finish

When supplied to the consumer, the Obut SOLEIL strie 0 pétanque boule has a natural stainless steel satin finish.

Maintenance

• Depending on whether the boule SOLEIL 0-grade striated is used intensively or not, the type of courts played on, the ambient humidity, etc., it may need to be cleaned after each game and at least once a month if it is not used.
• We recommend the Obut maintenance product.

A tip from Obut : don't leave your boules in the boot of your car, as this is exposed to sudden changes in temperature which lead to condensation.

These high humidity conditions will, in the long run, be detrimental to your boules by encouraging oxidation.
So remember to take your balls out of the boot of your car and store them indoors, in a dry place.

What elements should you keep for the warranty t?

• The warranty card located on the flap of the box.
• The exterior facing label.